 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3P10T Antenna Switch for GSM/UMTS Dual Mode Phones CXM3524ER Description The CXM3524ER is 3P10T anntena switch for quad bands GSM and quad bands UMTS dual mode. This IC has a decoder circuit which supports CMOS control. Sony JPHEMT GaAs process is utilized for low insertion loss and high linearity. (Applications: Quad bands GSM and quad bands UMTS dual mode phones) Features Low insertion loss Low voltage drive: 2.5 to 3.3V Supports CMOS control High ESD resistance Eliminates Output DC Blocking Capacitors to RF ports Lead-Free and RoHS Compliant Package VQFN-34P (3.8mm x 4.4mm x 0.85mm Max.) Structure GaAs Junction Gate pHEMT (JPHEMT) MMIC Switch, CMOS Decoder This IC is ESD sensitive device. Special handling precautions are required. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- E08713-CR CXM3524ER Absolute Maximum Ratings Supply voltage Control voltage Maximum input VDD Vctl [GSM Tx1] [GSM Tx2] [UMTS800M/1.5G/1.7G/2G] [GSM850/900/1800/1900 Rx] Operating temperature Storage temperature Topr Tstg 3.6 3.6 36 34 32 13 -30 to +90 -65 to +150 V V dBm dBm dBm dBm C C (Ta = 25C) (Ta = 25C) (Duty cycle = 12.5%) (Ta = 25C) (Duty cycle = 12.5%) (Ta = 25C) (Ta = 25C) (Ta = 25C) -2- CXM3524ER Block Diagram F1 Ant1 F2 F27 GND1-1 F28 GND1-2 F9 F10 F11 F5 GSM850Rx F6 GSM900Rx F7 GSM1800Rx F32 Ext F33 F31 F13 F14 UMTS1.5G F15 F16 F17 F18 F30 GND2-2 F19 F26 UMTS2G F24 F42 F25 F23 F12 F41 UMTS800M F8 GSM1900Rx F22 F4 F21 F3 GSM Tx2 F20 GSM Tx1 Ant2 F29 GND2-1 UMTS1.7G -3- CXM3524ER Pin Configuration GND2-1 12 GND GND GND 17 16 15 14 13 11 Ant2 Tx2 Ext GND Tx1 GND GND GSM850Rx GSM900Rx GSM1800Rx GSM1900Rx GND VDD 18 19 20 21 VQFN-34P PKG 22 23 Top View 24 25 26 27 (3.8mm x 4.4mm x 0.85mm Max.) 10 9 8 7 6 5 4 3 2 1 GND2-2 GND1-2 Ant1 GND1-1 UMTS800M UMTS2G UMTS1.7G UMTS1.5G GND CTLG 28 29 30 31 32 33 CTLE GND CTLA CTLB CTLC CTLD -4- CTLF 34 CXM3524ER Truth Table State CTLA CTLB CTLC CTLD CTLE CTLF CTLG 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 H H H H H H L L L L H H H H H H L L L L H L H H L L -- -- -- -- H L H H L L -- -- -- -- -- -- L H L H -- -- -- -- -- -- L H L H -- -- -- -- H H L L L L -- -- -- -- H H L L L L -- -- -- -- -- -- -- -- -- -- L H H L -- -- -- -- -- -- L H H L -- -- -- -- -- -- H L H L -- -- -- -- -- -- H L H L H H H H H H H H H H L L L L L L L L L L Active Port GSM Tx1 GSM Tx2 GSM850 Rx GSM900 Rx GSM1800 Rx GSM1900 Rx UMTS800M UMTS1.5G UMTS1.7G UMTS2G GSM Tx1 GSM Tx2 GSM850 Rx GSM900 Rx GSM1800 Rx GSM1900 Rx UMTS800M UMTS1.5G UMTS1.7G UMTS2G Active Ant ANT1 ANT2 ANT1 ANT1 ANT2 ANT2 ANT1 ANT1 ANT2 ANT2 EXT EXT EXT EXT EXT EXT EXT EXT EXT EXT F1 ON F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF ON OFF OFF ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF ON OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF OFF ON OFF OFF ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF State CTLA CTLB CTLC CTLD CTLE CTLF CTLG 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 H H H H H H L L L L H H H H H H L L L L H L H H L L -- -- -- -- H L H H L L -- -- -- -- -- -- L H L H -- -- -- -- -- -- L H L H -- -- -- -- H H L L L L -- -- -- -- H H L L L L -- -- -- -- -- -- -- -- -- -- L H H L -- -- -- -- -- -- L H H L -- -- -- -- -- -- H L H L -- -- -- -- -- -- H L H L H H H H H H H H H H L L L L L L L L L L Active Port GSM Tx1 GSM Tx2 GSM850 Rx GSM900 Rx GSM1800 Rx GSM1900 Rx UMTS800M UMTS1.5G UMTS1.7G UMTS2G GSM Tx1 GSM Tx2 GSM850 Rx GSM900 Rx GSM1800 Rx GSM1900 Rx UMTS800M UMTS1.5G UMTS1.7G UMTS2G Active Ant ANT1 ANT2 ANT1 ANT1 ANT2 ANT2 ANT1 ANT1 ANT2 ANT2 EXT EXT EXT EXT EXT EXT EXT EXT EXT EXT F20 OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON F21 ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON F22 ON ON OFF OFF OFF OFF ON ON ON ON ON ON OFF OFF OFF OFF ON ON ON ON F23 ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON F24 ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON F25 ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON OFF ON F26 ON ON ON ON ON ON ON ON ON F27 F28 F29 ON F30 ON F31 ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF F32 F33 F41 F42 ON OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON OFF OFF ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON OFF ON OFF OFF OFF OFF OFF ON OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON OFF OFF ON ON ON ON ON ON ON ON ON OFF ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF -5- CXM3524ER DC Bias Conditions (Ta = -30 to +85C) Item VDD Vctl (H) Vctl (L) Min. 2.5 1.5 0 Typ. 2.9 2.9 -- Max. 3.3 3.3 0.3 Unit V V V -6- CXM3524ER Electrical Characteristics 1 (Ta = 25C) Item Bias current Ctrl current 1 Ctrl current 2 Wake up time Switching speed -- -- Freq [MHz] -- -- Min. Typ. Max. Unit 280 0.01 0.01 -- -- 500 10 1 100 5 A A A s s Conditions VDD = 2.9V, Vctl = 0V VDD = 2.9V, Vctl = 2.9V VDD = 0V, Vctl = 2.9V VDD = 0 to 2.9V UMTS800M (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 824 to 849 869 to 894 824 to 849 869 to 894 824 to 849 UMTS800M - Ant1 Min. Typ. 0.45 0.45 0.52 0.52 1.1 1.05 1.1 1.1 -- -- 38 37 -- 38 37 -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -- Max. 0.60 0.60 0.67 0.67 1.5 1.5 1.5 1.5 -- UMTS800M - Ext Min. Typ. 0.51 0.51 0.70 0.70 1.1 1.05 1.1 1.1 16 16 -- 16 16 -- 33 46 -- 33 46 -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -- Max. 0.66 0.66 0.85 0.85 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dBm dBm dBm dBm dBc dBc dBm dBm dBm Conditions Insertion loss * Mounted recommended circuit UMTS800M Port Ant1, Ext Port UMTS800M Port Ant1, Ext Port When UMTS800M - Ant1 measurement When UMTS800M - Ant2 measurement When UMTS800M - Ext measurement When UMTS800M - Ant1 measurement When UMTS800M - Ant2 measurement When UMTS800M - Ext measurement VSWR 869 to 894 824 to 849 16 16 SW isolation -- 869 to 894 16 16 In-Rx band spurious Harmonics 869 to 894 1648 to 1698 2472 to 2547 3296 to 3396 ACLR IMD2 * Mounted recommended circuit 824 to 849 5MHz 824 to 849 10MHz fblock = 45 fblock = 1715 fblock = 790 fblock = 2550 RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm design guaranteed. -118 -111 -122 -112 -106 -101 -109 -104 -118 -111 -118 -111 -106 -101 -107 -102 IMD3 * Mounted recommended circuit dBm * The IMD characteristics are -7- CXM3524ER UMTS1.5G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1428 to 1448 1476 to 1496 1428 to 1448 1476 to 1496 1428 to 1448 UMTS1.5G - Ant1 Min. UMTS1.5G - Ext Typ. Max. 0.65 0.65 0.70 0.70 1.1 1.1 1.1 1.1 16 16 -- 39 39 -- 38 38 -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -- 0.80 0.80 0.85 0.85 1.5 1.5 1.5 1.5 Typ. Max. Min. 0.52 0.55 0.57 0.60 1.15 1.1 1.15 1.1 0.67 0.70 0.72 0.75 1.5 1.5 1.5 1.5 -- Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dBm dBm dBm dBm dBc dBc dBm dBm Conditions Insertion loss * Mounted recommended circuit UMTS1.5G Port Ant1, Ext Port UMTS1.5G Port Ant1, Ext Port When UMTS1.5G - Ant1 measurement When UMTS1.5G - Ant2 measurement When UMTS1.5G - Ext measurement When UMTS1.5G - Ant1 measurement When UMTS1.5G- Ant2 measurement When UMTS1.5G - Ext measurement VSWR 1476 to 1496 -- 1428 to 1448 16 16 SW isolation -- 1476 to 1496 16 16 In-Rx band spurious 1476 to 1496 2856 to 2896 Harmonics 4284 to 4344 5712 to 5792 1428 to 1448 ACLR 1428 to 1448 IMD2 * Mounted recommended circuit -- 28 28 -- 27 27 -- -- -- -- -- -- -- 16 16 -- -125 -44 -44 -44 -50 -55 5MHz 5MHz RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm design guaranteed. fblock = 48 fblock = 2924 fblock = 1390 fblock = 4362 -111 -105 -115 -108 -105 -100 -108 -103 -110 -105 -112 -107 -105 -100 -108 -103 IMD3 * Mounted recommended circuit dBm * The IMD characteristics are dBm -8- CXM3524ER UMTS1.7G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1750 to 1785 1845 to 1880 1750 to 1785 1845 to 1880 1750 to 1785 UMTS1.7G - Ant2 Min. Typ. 0.55 0.56 0.60 0.61 1.2 1.2 1.2 1.2 16 31 -- 24 30 -- 23 -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -- -- Max. 0.70 0.71 0.75 0.76 1.5 1.5 1.5 1.5 UMTS1.7G - Ext Min. Typ. 0.75 0.77 0.80 0.82 1.1 1.05 1.1 1.05 16 16 -- 16 16 -- 41 34 -- 40 33 -- -- -- -- -- -- -- -- -- Max. 0.90 0.92 0.95 0.97 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB Conditions Insertion loss * Mounted recommended circuit UMTS1.7G Port Ant2, Ext Port UMTS1.7G Port Ant2, Ext Port When UMTS1.7G Ant1 measurement When UMTS1.7G Ant2 measurement When UMTS1.7G Ext measurement When UMTS1.7G Ant1 measurement When UMTS1.7G Ant2 measurement When UMTS1.7G Ext measurement VSWR 1845 to 1880 1750 to 1785 -- 16 SW isolation 16 1845 to 1880 -- 16 In-Rx band spurious 1845 to 1880 3500 to 3570 Harmonics 5250 to 5355 7000 to 7140 1750 to 1785 ACLR 1750 to 1785 10MHz IMD2 * Mounted recommended circuit -125 dBm -44 -44 -44 -50 -55 dBm dBm dBm dBc RBW = 30kHz, Channel power measurement dBc (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm are design guaranteed. 5MHz fblock = 95 fblock = 3625 fblock = 1670 fblock = 5390 -111 -106 -113 -106 -106 -101 -111 -106 -105 -100 dBm -111 -106 dBm IMD3 * Mounted recommended circuit -105 -100 dBm * The IMD characteristics -113 -106 dBm -9- CXM3524ER UMTS2G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1920 to 1980 2110 to 2170 1920 to 1980 2110 to 2170 1920 to 1980 UMTS2G - Ant2 Min. UMTS2G - Ext Typ. Max. 0.76 0.85 0.81 0.90 1.1 1.05 1.15 1.1 16 35 32 -- 34 31 -- 58 -- -- -- -- -- -- -103 -- -- 0.91 1.00 0.96 1.05 1.5 1.5 1.5 1.5 Typ. Max. Min. 0.52 0.58 0.57 0.63 1.15 1.2 1.1 1.15 0.67 0.73 0.72 0.78 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dB Conditions Insertion loss * Mounted recommended circuit UMTS2G Port Ant2, Ext Port UMTS2G Port Ant2, Ext Port When UMTS2G - Ant1 measurement When UMTS2G - Ant2 measurement When UMTS2G - Ext measurement When UMTS2G - Ant1 measurement When UMTS2G - Ant2 measurement When UMTS2G - Ext measurement UMTS2G GSM1900Rx VSWR 2110 to 2170 16 1920 to 1980 -- 16 SW isolation 16 2110 to 2170 -- 16 Isolation Tx Rx In-Rx band spurious 1920 to 1980 2110 to 2170 3840 to 3960 Harmonics 5760 to 5940 7680 to 7920 1920 to 1980 ACLR 1920 to 1980 IMD2 * Mounted recommended circuit 25 -- 24 24 -- 23 61 -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -- -- 16 -- 16 16 -- 22 22 -125 dBm -44 -44 -44 -50 -55 -98 dBm dBm dBm dBc RBW = 30kHz, Channel power measurement dBc (Bandwidth 3.84MHz) dBm PTx = 21dBm Pblock = -15dBm design guaranteed. 5MHz 10MHz fblock = 190 fblock = 4090 fblock = 1760 fblock = 6040 -107 -102 -111 -106 -105 -100 -114 -107 -111 -106 dBm -103 -98 IMD3 * Mounted recommended circuit dBm * The IMD characteristics are -112 -107 dBm - 10 - CXM3524ER GSM Tx1 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 35dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM Tx1 - Ant1 Min. Typ. 0.35 Max. 0.50 GSM Tx1 - Ext Min. Typ. 0.45 Max. 0.60 Unit Conditions 824 to 915 dB Insertion loss * Mounted recommended circuit 824 to 915 0.42 1.1 1.1 -- -- 41 27 44 56 60 62 43 35 38 34 41 -- 38 -- 0.57 1.5 1.5 -- 25 25 -- 31 31 31 31 31 31 31 31 -- 25 -- 25 0.67 1.1 1.1 50 44 -- 39 50 54 57 70 43 45 42 -- 37 -- 39 0.82 1.5 1.5 dB -- -- dB dB GSM Tx1 Port Ant1, Ext Port When GSM Tx - Ant1 measurement When GSM Tx - Ant2 measurement When GSM Tx - Ext measurement Tx1 when selecting Tx1 - Ant1 and Tx1-Ext GSM850Rx Tx1 when selecting Tx1 - Ant1 and Tx1-Ext GSM900Rx Tx1 when selecting Tx1 - Ant1 and Tx1-Ext GSM1800Rx Tx1 when selecting Tx1 - Ant1 and Tx1-Ext GSM1900Rx Tx1 when selecting Tx1 - Ant1 and Tx1-Ext UMTS800M Tx1 when selecting Tx1 - Ant1 and Tx1-Ext UMTS1.5G Tx1 when selecting Tx1 - Ant1 and Tx1-Ext UMTS1.7G Tx1 when selecting Tx1 - Ant1 and Tx1-Ex t UMTS2G Tx1 when selecting Ant1 GSM850Rx Ant1 Tx1 when selecting Ant1 GSM850Rx Ext Tx1 when selecting Ant1 GSM900Rx Ant1 Tx1 when selecting Ant1 GSM900Rx Ext VSWR 824 to 915 SW isolation 824 to 915 25 22 31 31 31 31 -- dB dB dB dB dB dB dB dB dB dB dB dB dB Isolation Tx Rx 824 to 915 31 31 31 29 25 824 to 849 -- Isolation Tx Ant 25 880 to 915 -- - 11 - CXM3524ER GSM Tx1 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 35dBm) Item Freq [MHz] 1648 to 1830 2472 to 2745 3296 to 3660 4120 to 4575 4944 to 5490 5768 to 6405 Harmonics 6592 to 7320 7416 to 8235 8240 to 9150 9064 to 10065 9888 to 10980 10712 to 11895 11536 to 12810 12360 to 13725 2Tx 3Tx 4Tx 5Tx 6Tx 7Tx 8Tx 9Tx 10Tx 11Tx 12Tx 13Tx 14Tx 15Tx GSM Tx1 - Ant1 Min. Typ. -50 -41 -- -- -- -- -- -- -- -- -- -- -- -- Max. -36 -33 -36 -42 -46 -46 -46 -46 -46 -46 -46 -46 -46 -46 GSM Tx1 - Ext Min. Typ. -49 -41 -- -- -- -- -- -- -- -- -- -- -- -- Max. -36 -33 -36 -42 -46 -46 -46 -46 -46 -46 -46 -46 -46 -46 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Conditions - 12 - CXM3524ER GSM Tx2 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 32dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1710 to 1785 1850 to 1910 1710 to 1785 1850 to 1910 1710 to 1785 GSM Tx2 - Ant2 Min. Typ. 0.43 0.47 0.48 0.52 1.15 1.15 1.15 1.15 22 34 -- 23 33 -- 22 45 53 54 55 30 30 38 28 27 -- 26 -- -- -- -- -- Max. 0.60 0.65 0.65 0.70 1.5 1.5 1.5 1.5 GSM Tx2 - Ext Min. Typ. 0.57 0.62 0.62 0.67 1.1 1.1 1.1 1.1 22 22 -- 22 22 -- 28 28 28 28 23 23 28 23 -- 19 -- 19 49 32 -- 48 31 -- 36 46 50 52 31 32 43 31 -- 24 -- 23 -- -- -- -- Max. 0.72 0.77 0.77 0.82 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Conditions Insertion loss * Mounted recommended circuit GSM Tx2 Port Ant2, Ext Port GSM Tx2 Port Ant2, Ext Port When GSM Tx2 - Ant1 measurement When GSM Tx2 - Ant2 measurement When GSM Tx2 - Ext measurement When GSM Tx2 - Ant1 measurement When GSM Tx2 - Ant2 measurement When GSM Tx2 - Ext measurement Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM850Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM900Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM1800Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM1900Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS800M Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS1.5G Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS1.7G Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS2G Tx2 when selecting Ant2 GSM1800Rx Ant2 Tx2 when selecting Ext GSM1800Rx Ext Tx2 when selecting Ant2 GSM1900Rx Ant2 Tx2 when selecting Ext GSM1900Rx Ext VSWR 1850 to 1910 1710 to 1785 -- 17 SW isolation 22 1850 to 1910 -- 17 28 28 28 28 Isolation Tx Rx 1710 to 1910 23 23 28 23 22 1710 to 1785 -- Isolation Tx Ant 22 1850 to 1910 -- - 13 - CXM3524ER GSM Tx2 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 32dBm) Item Freq [MHz] 3420 to 3570 3700 to 3820 5130 to 5355 5550 to 5730 6840 to 7140 Harmonics 7400 to 7640 8550 to 8925 9250 to 9550 10260 to 10710 11100 to 11460 11970 to 12495 GSM Tx2 - Ant2 Min. 2Tx Typ. -49 -49 -47 -45 -- -- -- -- -- -- -- Max. -39 -39 -39 -39 -42 -42 -45 -45 -45 -45 -45 GSM Tx2 - Ext Min. Typ. -45 -45 -43 -42 -- -- -- -- -- -- -- Max. -39 -39 -37 -36 -42 -42 -45 -45 -45 -45 -45 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Conditions 3Tx 4Tx 5Tx 6Tx 7Tx - 14 - CXM3524ER GSM850Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM850Rx - Ant1 Min. Typ. 0.88 Max. 1.03 GSM850Rx - Ext Min. Typ. 0.92 Max. 1.07 Unit Conditions 869 to 894 dB Insertion loss * Mounted recommended circuit 869 to 894 0.93 1.2 1.1 1.08 1.5 1.5 1.05 1.2 1.15 1.20 1.5 1.5 dB -- -- GSM850Rx Port Ant1, Ext Port VSWR 869 to 894 GSM900Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM900Rx - Ant1 Min. Typ. 0.89 Max. 1.04 GSM900Rx - Ext Min. Typ. 0.94 Max. 1.09 Unit Conditions 925 to 960 dB Insertion loss * Mounted recommended circuit 925 to 960 0.94 1.2 1.05 1.09 1.5 1.5 1.07 1.2 1.1 1.25 1.5 1.5 dB -- -- GSM900Rx Port Ant1, Ext Port VSWR 925 to 960 - 15 - CXM3524ER GSM1800Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM1800Rx - Ant2 Min. Typ. 0.93 Max. 1.08 GSM1800Rx - Ext Min. Typ. 1.20 Max. 1.35 Unit Conditions 1805 to 1880 dB Insertion loss * Mounted recommended circuit 1805 to 1880 0.98 1.25 1.2 1.13 1.5 1.5 1.23 1.2 1.25 1.38 1.5 1.5 dB -- -- GSM1800Rx Port Ant2, Ext Port VSWR 1805 to 1880 GSM1900Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM1900Rx - Ant2 Min. Typ. 0.95 Max. 1.10 GSM1900Rx - Ext Min. Typ. 1.21 Max. 1.36 Unit Conditions 1930 to 1990 dB Insertion loss * Mounted recommended circuit 1930 to 1990 1.00 1.3 1.3 1.15 1.7 1.7 1.24 1.2 1.3 1.39 1.5 1.7 dB -- -- GSM1900Rx Port Ant2, Ext Port VSWR 1930 to 1990 - 16 - CXM3524ER Electrical Characteristics 2 (Ta = -30 to +85C) Item Bias current Ctrl current 1 Ctrl current 2 Wake up time Switching speed Freq [MHz] -- -- -- -- -- Min. Typ. 290 0.1 0.1 -- -- Max. 550 20 2 100 5 Unit A A A s s Conditions VDD = 2.9V, Vctl = 0V VDD = 2.9V, Vctl = 2.9V VDD = 0V, Vctl = 2.9V VDD = 0 to 2.9V UMTS800M (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 824 to 849 869 to 894 824 to 849 869 to 894 824 to 849 UMTS800M - Ant1 Min. UMTS800M - Ext Typ. Max. -- -- -- -- -- -- -- -- 16 16 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0.76 0.76 0.95 0.95 1.5 1.5 1.5 1.5 Typ. Max. Min. -- -- -- -- -- -- -- -- 0.70 0.70 0.77 0.77 1.5 1.5 1.5 1.5 -- Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB Conditions Insertion loss * Mounted recommended circuit UMTS800M Port Ant1, Ext Port UMTS800M Port Ant1, Ext Port When UMTS800M - Ant1 measurement When UMTS800M - Ant2 measurement When UMTS800M - Ext measurement When UMTS800M - Ant1 measurement When UMTS800M - Ant2 measurement When UMTS800M - Ext measurement VSWR 869 to 894 -- 824 to 849 16 16 SW isolation -- 869 to 894 16 16 In-Rx band spurious 869 to 894 1648 to 1698 Harmonics 2472 to 2547 3296 to 3396 ACLR IMD2 * Mounted recommended circuit -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 16 16 -- -125 -44 -44 -44 -50 -55 -108 -109 -98 -101 -125 dBm -44 -44 -44 -50 -55 dBm dBm dBm dBc dBc RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm design guaranteed. 824 to 849 824 to 849 5MHz 10MHz fblock = 45 fblock = 1715 fblock = 790 fblock = 2550 -108 dBm -108 dBm -98 -99 IMD3 * Mounted recommended circuit dBm * The IMD characteristics are dBm - 17 - CXM3524ER UMTS1.5G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1428 to 1448 1476 to 1496 1428 to 1448 1476 to 1496 1428 to 1448 UMTS1.5G - Ant1 Min. UMTS1.5G - Ext Typ. Max. -- -- -- -- -- -- -- -- 16 16 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -102 -104 -97 -100 -- 0.90 0.90 0.95 0.95 1.5 1.5 1.5 1.5 Typ. Max. Min. -- -- -- -- -- -- -- -- 0.77 0.80 0.82 0.85 1.5 1.5 1.5 1.5 -- Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dBm dBm dBm dBm dBc dBc dBm dBm Conditions Insertion loss * Mounted recommended circuit UMTS1.5G Port Ant1, Ext Port UMTS1.5G Port Ant1, Ext Port When UMTS1.5G Ant1 measurement When UMTS1.5G Ant2 measurement When UMTS1.5G - Ext measurement When UMTS1.5G Ant1 measurement When UMTS1.5G Ant2 measurement When UMTS1.5G - Ext measurement VSWR 1476 to 1496 -- 1428 to 1448 16 16 SW isolation -- 1476 to 1496 16 16 In-Rx band spurious 1476 to 1496 2856 to 2896 Harmonics 4284 to 4344 5712 to 5792 1428 to 1448 ACLR 1428 to 1448 IMD2 * Mounted recommended circuit -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 16 16 -- -125 -44 -44 -44 -50 -55 -102 -105 -97 -100 5MHz 10MHz RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm are design guaranteed. fblock = 48 fblock = 2924 fblock = 1390 fblock = 4362 IMD3 * Mounted recommended circuit dBm * The IMD characteristics dBm - 18 - CXM3524ER UMTS1.7G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1750 to 1785 1845 to 1880 1750 to 1785 1845 to 1880 1750 to 1785 UMTS1.7G - Ant2 Min. UMTS1.7G - Ext Typ. Max. -- -- -- -- -- -- -- -- 16 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -97 -103 -97 -103 -- 1.00 1.02 1.05 1.07 1.5 1.5 1.5 1.5 Typ. Max. Min. -- -- -- -- -- -- -- -- 0.80 0.81 0.85 0.86 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dBm dBm dBm dBm dBc dBc dBm dBm Conditions Insertion loss * Mounted recommended circuit UMTS1.7G Port Ant2, Ext Port UMTS1.7G Port Ant2, Ext Port When UMTS1.7G Ant1 measurement When UMTS1.7G Ant2 measurement When UMTS1.7G - Ext measurement When UMTS1.7G Ant1 measurement When UMTS1.7G Ant2 measurement When UMTS1.7G - Ext measurement VSWR 1845 to 1880 16 1750 to 1785 -- 16 SW isolation 16 1845 to 1880 -- 16 In-Rx band spurious 1845 to 1880 3500 to 3570 Harmonics 5250 to 5355 7000 to 7140 1750 to 1785 ACLR 1750 to 1785 IMD2 * Mounted recommended circuit -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -103 -103 -98 -103 -- -- 16 -- 16 16 -- 5MHz 10MHz RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm are design guaranteed. fblock = 95 fblock = 3625 fblock = 1670 fblock = 5390 IMD3 * Mounted recommended circuit dBm * The IMD characteristics dBm - 19 - CXM3524ER UMTS2G (VDD = 2.9V, Vctl = 0/2.9V, Pin = 26dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1920 to 1980 2110 to 2170 1920 to 1980 2110 to 2170 1920 to 1980 UMTS2G - Ant2 Min. UMTS2G - Ext Typ. Max. -- -- -- -- -- -- -- -- 16 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -95 -103 -95 -104 -- -- 1.01 1.10 1.06 1.15 1.5 1.5 1.5 1.5 Typ. Max. Min. -- -- -- -- -- -- -- -- 0.77 0.83 0.82 0.88 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dB dBm dBm dBm dBm dBc dBc dBm dBm Conditions Insertion loss * Mounted recommended circuit UMTS2G Port Ant2, Ext Port UMTS2G Port Ant2, Ext Port When UMTS2G - Ant1 measurement When UMTS2G - Ant2 measurement When UMTS2G - Ext measurement When UMTS2G - Ant1 measurement When UMTS2G - Ant2 measurement When UMTS2G - Ext measurement When UMTS2G GSM1900Rx VSWR 2110 to 2170 16 1920 to 1980 -- 16 SW isolation 16 2110 to 2170 -- 16 Isolation Tx Rx In-Rx band spurious 1920 to 1980 2110 to 2170 3840 to 3960 Harmonics 5760 to 5940 7680 to 7920 1920 to 1980 ACLR 1920 to 1980 IMD2 * Mounted recommended circuit -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -125 -44 -44 -44 -50 -55 -99 -103 -97 -104 -- -- 16 -- 16 16 -- 22 22 5MHz 10MHz RBW = 30kHz, Channel power measurement (Bandwidth 3.84MHz) PTx = 21dBm Pblock = -15dBm are design guaranteed. fblock = 190 fblock = 4090 fblock = 1760 fblock = 6040 IMD3 * Mounted recommended circuit dBm * The IMD characteristics dBm - 20 - CXM3524ER GSM Tx1 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 35dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM Tx1 - Ant1 Min. Typ. -- Max. 0.60 GSM Tx1 - Ext Min. Typ. -- Max. 0.70 Unit Conditions 824 to 915 dB Insertion loss * Mounted recommended circuit 824 to 915 -- -- -- -- -- -- -- 0.67 1.5 1.5 -- 25 25 -- -- -- -- -- -- -- 0.92 1.5 1.5 dB -- -- dB dB GSM Tx1 Port Ant1, Ext Port When GSM Tx1 - Ant1 measurement When GSM Tx1 - Ant2 measurement When GSM Tx1 - Ext measurement Tx1 when selecting Tx1 Ant1 and Tx1-Ext GSM850Rx Tx1 when selecting Tx1 Ant1 and Tx1-Ext GSM900Rx Tx1 when selecting Tx1 Ant1 and Tx1-Ext GSM1800Rx Tx1 when selecting Tx1 Ant1 and Tx1-Ext GSM1900Rx Tx1 when selecting Tx1 Ant1 and Tx1-Ext UMTS800M Tx1 when selecting Tx1 Ant1 and Tx1-Ext UMTS1.5G Tx1 when selecting Tx1 Ant1 and Tx1-Ext UMTS1.7G Tx1 when selecting Tx1 Ant1 and Tx1-Ext UMTS2G Tx1 when selecting Ant1 GSM850Rx Ant1 Tx1 when selecting Ant1 GSM850Rx Ext Tx1 when selecting Ant1 GSM900Rx Ant1 Tx1 when selecting Ant1 GSM900Rx Ext VSWR 824 to 915 SW isolation 824 to 915 25 22 -- dB 31 -- 31 -- dB 31 -- 31 -- dB 31 -- 31 -- dB 31 Isolation Tx Rx 824 to 915 31 -- 31 -- dB -- 31 -- dB 30 -- 31 -- dB 31 -- 31 -- dB 29 25 824 to 849 -- Isolation Tx Ant 25 880 to 915 -- -- -- -- -- -- 31 -- 25 -- 25 -- -- -- -- -- dB dB dB dB dB - 21 - CXM3524ER GSM Tx1 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 35dBm) Item Freq [MHz] 1648 to 1830 2472 to 2745 3296 to 3660 4120 to 4575 4944 to 5490 5768 to 6405 Harmonics 6592 to 7320 7416 to 8235 8240 to 9150 9064 to 10065 9888 to 10980 10712 to 11895 11536 to 12810 12360 to 13725 2Tx 3Tx 4Tx 5Tx 6Tx 7Tx 8Tx 9Tx 10Tx 11Tx 12Tx 13Tx 14Tx 15Tx GSM Tx1 - Ant1 Min. Typ. -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max. -33 -30 -36 -42 -46 -46 -46 -46 -46 -46 -46 -46 -46 -46 GSM Tx1 - Ext Min. Typ. -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max. -33 -30 -36 -42 -46 -46 -46 -46 -46 -46 -46 -46 -46 -46 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Conditions - 22 - CXM3524ER GSM Tx2 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 32dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] 1710 to 1785 1850 to 1910 1710 to 1785 1850 to 1910 1710 to 1785 GSM Tx2 - Ant2 Min. Typ. -- -- -- -- -- -- -- -- 22 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max. 0.70 0.75 0.75 0.80 1.5 1.5 1.5 1.5 GSM Tx2 - Ext Min. Typ. -- -- -- -- -- -- -- -- 22 22 -- 22 22 -- 28 28 28 28 23 23 28 23 -- 19 -- 19 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Max. 0.82 0.87 0.87 0.92 1.5 1.5 1.5 1.5 Unit dB dB dB dB -- -- -- -- dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Conditions Insertion loss * Mounted recommended circuit GSM Tx2 Port Ant2, Ext Port GSM Tx2 Port Ant2, Ext Port When GSM Tx2 - Ant1 measurement When GSM Tx2 - Ant2 measurement When GSM Tx2 - Ext measurement When GSM Tx2 - Ant1 measurement When GSM Tx2 - Ant2 measurement When GSM Tx2 - Ext measurement Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM850Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM900Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM1800Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext GSM1900Rx Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS800M Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS1.5G Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS1.7G Tx2 when selecting Tx2 - Ant2 and Tx2-Ext UMTS2G Tx2 when selecting Ant2 GSM1800Rx Ant2 VSWR 1850 to 1910 1710 to 1785 -- 17 SW isolation 22 1850 to 1910 -- 17 28 28 28 28 Isolation Tx Rx 1710 to 1910 23 23 28 23 22 1710 to 1785 -- Isolation Tx Ant 22 1850 to 1910 -- Tx2 when selecting Ext GSM1800Rx Ext Tx2 when selecting Ant2 GSM1900Rx Ant2 Tx2 when selecting Ext GSM1900Rx Ext - 23 - CXM3524ER GSM Tx2 (VDD = 2.9V, Vctl = 0/2.9V, Pin = 32dBm) Item Freq [MHz] 3420 to 3570 3700 to 3820 5130 to 5355 5550 to 5730 6840 to 7140 Harmonics 7400 to 7640 8550 to 8925 9250 to 9550 10260 to 10710 11100 to 11460 11970 to 12495 GSM Tx2 - Ant2 Min. 2Tx Typ. -- -- -- -- -- -- -- -- -- -- -- Max. -39 -39 -39 -39 -42 -42 -45 -45 -45 -45 -45 GSM Tx2 - Ext Min. Typ. -- -- -- -- -- -- -- -- -- -- -- Max. -39 -39 -37 -36 -42 -42 -45 -45 -45 -45 -45 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Conditions 3Tx 4Tx 5Tx 6Tx 7Tx - 24 - CXM3524ER GSM850Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM850Rx - Ant1 Min. Typ. -- Max. 1.13 GSM850Rx - Ext Min. Typ. -- Max. 1.17 Unit Conditions 869 to 894 dB Insertion loss * Mounted recommended circuit 869 to 894 -- -- -- 1.18 1.5 1.5 -- -- -- 1.30 1.5 1.5 dB -- -- GSM850Rx Port Ant1, Ext Port VSWR 869 to 894 GSM900Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM900Rx - Ant1 Min. Typ. -- Max. 1.14 GSM900Rx - Ext Min. Typ. -- Max. 1.19 Unit Conditions 925 to 960 dB Insertion loss * Mounted recommended circuit 925 to 960 -- -- -- 1.19 1.5 1.5 -- -- -- 1.35 1.5 1.5 dB -- -- GSM900Rx Port Ant1, Ext Port VSWR 925 to 960 - 25 - CXM3524ER GSM1800Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM1800Rx - Ant2 Min. Typ. -- Max. 1.18 GSM1800Rx - Ext Min. Typ. -- Max. 1.45 Unit Conditions 1805 to 1880 dB Insertion loss * Mounted recommended circuit 1805 to 1880 -- -- -- 1.23 1.5 1.5 -- -- -- 1.48 1.5 1.5 dB -- -- GSM1800Rx Port Ant2, Ext Port VSWR 1805 to 1880 GSM1900Rx (VDD = 2.9V, Vctl = 0/2.9V, Pin = 0dBm) Item Insertion loss * Non-mounted recommended circuit Freq [MHz] GSM1900Rx - Ant2 Min. Typ. -- Max. 1.20 GSM1900Rx - Ext Min. Typ. -- Max. 1.46 Unit Conditions 1930 to 1990 dB Insertion loss * Mounted recommended circuit 1930 to 1990 -- -- -- 1.25 1.7 1.7 -- -- -- 1.49 1.5 1.7 dB -- -- GSM1900Rx Port Ant2, Ext Port VSWR 1930 to 1990 - 26 - CXM3524ER Recommended Circuit Tx2 Ext Ant2 22pF 22nH 7pF 22nH 17 Tx2 16 GND 15 GND 14 Ext 13 GND 12 GND2-1 11 Ant2 GND2-2 10 GND1-2 9 15pF 18 GND Tx1 19 Tx1 20 GND Ant1 8 33nH Ant1 21 GND GND1-1 7 GSM850Rx 22 GSM850Rx UMTS800M 6 UMTS800M GSM900Rx 23 GSM900Rx UMTS2G 5 UMTS2G GSM1800Rx 24 GSM1800Rx UMTS1.7G 4 UMTS1.7G GSM1900Rx 25 GSM1900Rx UMTS1.5G 3 UMTS1.5G 26 GND GND 2 VDD 27 VDD CTLC CTLD CTLA CTLB CTLE GND (Cbypass) CTLG CTLF 1 (Cbypass) CTLG 28 29 30 31 32 33 34 (Cbypass) (Cbypass) (Cbypass) (Cbypass) (Cbypass) (Cbypass) GND CTLA CTLD CTLE CTLF 1 When the DC level of the connected device is GND or open, no DC blocking capacitors are required. 2 The DC level of each RF pin is GND. 3 Cbypass: This capacitor is used for DC line bypass (100pF is recommended.) - 27 - CXM3524ER Evaluation Board The board as shown below is used for the CXM3524ER characteristics measurement. Surface layer (48m) Core material GND (18m) Prepreg GND (18m) Core material Rear face (48m) 300m 213m 945m 300m via UMTS1.5G GSM1900Rx UMTS1.7G GSM1800Rx UMTS2G GSM900Rx GSM850Rx UMTS800M Ant1 GSM Tx1 Ant2 Ext GSM Tx2 - 28 - CXM3524ER Package Outline (Unit: mm) LEAD PLATING SPECIFICATIONS ITEM LEAD MATERIAL SOLDER COMPOSITION PLATING THICKNESS SPEC. COPPER ALLOY Sn-Bi Bi:1-4wt% 5-18m - 29 - Sony Corporation |
Price & Availability of CXM3524ER
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |